Is it time to call a tree service in Sugar Land to remove that old tree? It can be a painful choice to make, but sometimes the tree gets too close to the house, gets too diseased, gets an incurable infestation of some pest, or grows too tall and gets close to a power line. If any of these things occur, its best to do the right thing and get rid of the tree. Although you might have spent hours and hours getting the tree to where it is today, it is almost dishonorable to the tree to allow it to suffer in bad conditions.
Our tree removal service will plan it out, climb up the tree and tie two long ropes near the top. Anchor them on the opposite side of the one that we want it to fall towards. This will allow us to adjust the direction the tree is being lowered in, just in case it starts leaning towards anything it could destroy.
Call Us Now for a Free Quote on Tree Removal, Tree Topping, Tree Pruning and Stump Removal.
Call Now (832) 900-4016
Once the tree is down, stump removal can be slightly more difficult. We have several choices; use a stump chipper that will completely destroy the visible section of the stump. Or we can dig it out. Digging out the stump is much more thorough, but takes time. You can choose to do this yourself or have the family help. If you have kids this shouldn’t be a problem. Kids often find the thought of digging fun, and are excited to go outside and dig all day long with their friends.
Stump Grinders - Use Stump Grinders Safely!
A huge amount of technical bearing data and procedure is offered by most bearing manufacturers. If you are like me, you simply do not have the time, patience, or interest, in wading through all of this information, with cost effectiveness being unsupported by the frequent need to outsource bearing maintenance, but yet do have an interest in running cost reduction for your tree stump grinder. Replacement bearings cost over £100 each, and represent a large portion of overall machine maintenance costs. This guide is meant for those who wish to reduce cost by increasing bearing service life. Bearing failure or premature bearing wear on stump grinders is mainly due to inadequate maintenance of clean lubricant. I use a pneumatic grease dispenser driven by an air compressor at each days end of stump grinding, with a grease top up, out in the field, using a conventional hand-held grease pump. I use a great deal of grease but it is far cheaper than replacement bearings. When I re-grease bearings, I thoroughly purge out the contaminated grease, until clean grease exudes from the bearing. A high melting point EP-2 grease is essential. I prefer a molybdenum disulphide (moly) enriched EP-2 complex grease because it is a heavy-duty grease. So, to sum up this paragraph, there are three principles of maximizing bearing life insofar as lubricants are concerned:
- select the correct grease
- apply the correct grease properly e.g in the correct quantity
- re-grease frequently
It is unfortunate for all stump grinder operators, that by the time a bearing knocks, rumbles, or noticeably heats up, it is shortly on its way to failure. There is no practical way for the average owner / operator to accurately judge the length of serviceable time remaining in a stump grinders bearing while out in the field.
From this viewpoint, I am making an attempt to try to collect some useable data out in the field, which may prove to be a practical and inexpensive way to monitor bearing serviceability. I will be installing thermocouples (heat sensors) to the bearings. If a running average temperature gradient can be established, it may prove helpful to those stump grinders who are concerned with maximizing their machines bearing life, by simply adjusting up their bearings, when its temperature rise indicates time to do so. This will require some effort on the part of those interested. They too will need to fit thermocouples to their bearings to monitor temperature as the only cost-effective, and practical way to know when to adjust up their bearings.
This effort will be totally negated if a strict and sufficient re-greasing program is not maintained. What would be the point of regular, timely, bearing adjustments, if the bearings regularly ran in a bed of contaminated grease. I think the reader will agree, is a total waste of time and effort.
Call Us Now for a Free Quote on Tree Removal, Tree Topping, Tree Pruning and Stump Removal in Sugar Land.
Call Now (832) 900-4016
Tree Trimming - Do It Yourself
First of all, what good does tree pruning trimming and shaping do for my trees? Secondly, why do it in the winter months? Trimming a tree or pruning is necessary for many reasons. An important reason to prune a tree is to lessen the chance of it falling during a wind or ice storm. Thinning a large tree canopy is a great way to reduce wind resistance.
Once pruned, air can now breeze with ease through the top of a tree requiring much less stabilization and pressure on the root system. Tree maintenance is also appealing to the eye like grass cutting. Cutting dead limbs helps prevent the spread of disease or bacteria, and avoids potential hazards. There are many benefits to trimming, shaping, & pruning a tree.
So why is pruning a tree in the winter so effective? There are many reasons. I will point out a few important ones.
1 - It is Cheaper! Most tree cutting service prices are low in the winter months since this is a slow period. Local tree service cost is very competitive during this season.
It is necessary sometimes to remove live limbs, especially if a tree is potentially hazardous with a lean. If a large heavy limb is on the side of the lean and the tree has grown towards a structure, then by removing this large limb (leader) you can decrease the chance of tree fall. A trees canopy and weight of large limbs has a lot to do with why a tree falls in a storm. Especially a tree is not diseased or dead, although usually there is a mix of issues for a large tree to tumble over in a storm.
Tree trimming, cutting, pruning, & shaping are necessary tasks. As homeowners, it is our responsibility to maintain our trees and keep our yards and neighbors safe. Performing tree work of any kind in the winter is a smart move and saves on the annual tree maintenance budget. So put on a warm coat, get out there in that Cold weather, and get those trees pruned! Contact a local company to provide your tree cutting service.
Tree Trimming Costs - What Factors In?
A good tree removal service provider offers a complete service: trimming, pruning, removal, stump removal, land clearing, and even emergency clean up. They are also aware on how to properly address needs of trees or tree care. They would suggest clients to refrain tree topping and offer other alternatives. It is very important to hire services of knowledgeable contractors to lessen the chance of accidents and damages.
Tree removal is strenuous and dangerous work. It is important to use the latest and state-of-the-art tools and equipment. The best services also include 'round the clock services in cases of disasters. But before deciding on which service contractor to get, one must identify the reason of the tree removal service. Some of the most common tree problems are dead trees and branches, fungus growths and leaning trees.
o Affinity Tree Service
They offer tree topping, brush chipping, pruning and others. They are located in Federal Way, Washington. It offers a 24-hour emergency service.
o Allen Tree Service
They have been providing service for 15 years. They also offer tree removals on natural disasters. They are located in Cary, NC.
o Morales Tree Service
They have been providing service for 17 years. They offer pruning, shaping, cabling and tree care. They make sure worksites are cleaned and cleared by the time they are finished.
o Paul John's Tree Service
They have been in the business since 1985 and office is located in Lower Bucks County, Pennsylvania. They offer fats tree removal services and landscaping jobs.